Batch file - from .CR2 to .DCM

February 07, 2012, 05:06:44 am

Welcome, Guest. Please login or register.

News: DMMD is currently developing Visere 6.0, a multi-OS image processing and viewing platform.

Home

Help

Calendar

dmmd.net > Visere > Visere Support (Moderator: Darian) > Batch file - from .CR2 to .DCM

Pages: [1] Go Down

« previous next »

	Author	Topic: Batch file - from .CR2 to .DCM (Read 4438 times)
0 Members and 1 Guest are viewing this topic.

dougstuff

Newbie

Offline

Posts: 1

Batch file - from .CR2 to .DCM

« on: July 08, 2009, 04:14:54 pm »

I'm new to Visere but noticed said support for Canon .CR2 files and DICOM.... is there a way to convert from .CR2 directly to .DCM? I can open either type in the viewer and can convert but not to .DCM; any help is appreciated.


	Logged

Darian

Global Moderator
Newbie

Offline

Posts: 9

Re: Batch file - from .CR2 to .DCM

« Reply #1 on: July 10, 2009, 07:16:43 am »

Hi,

Visere 4.1 only allows reading DICOM files. However, our new Visere 5.0 will support both read and writes, together with command line parameters. In 5.0 you will be able to run the conversion from the command line, or from within the viewer. We should have the support in 5.0 available sometimes within the next two weeks. If you send us an email (support at dmmd dot net) we will send you an alpha version of 5.0 when the support for DICOM becomes available.

Best,
Darian


	Logged

Pages: [1] Go Up

« previous next »